Standard Abrasives A/O Spiral Band 707115, 1 in x 1 in 50, Case of 100

• Aluminum oxide mineral is friable and breaks down to reveal sharp cutting edges for a consistent cut
• No tools required for band changes
• Single ply abrasive is flexible and tensile, conforming to flat and contoured surfaces
• Spiral band easily fits over rubber drums
• Spiral construction helps eliminate shadow marks and chatter

Standard Abrasives Aluminum Oxide Spiral Band is a tensile yet strong abrasive – great for light finishing, polishing, blending and deburring on both hard and soft metals.

Recommended Applications
Standard Abrasives™ Aluminum Oxide Spiral Band is the best product for polishing and blending flat surfaces and contours, because its spiral shape enables it to smoothly roll over these surfaces. The circular band rotates centrifugally as you move it around the workpiece and – given its small size – the abrasive can easily fit inside hard-to-reach areas. Standard Abrasives™ Aluminum Oxide Spiral Band is great for removing parting lines, tiny imperfections and little burrs, which could otherwise be difficult to remove with a larger abrasive disc or wheel.

Special Features
The spiral construction on Standard Abrasives™ Aluminum Oxide Spiral Band eliminates shadow marks and chatter. Aluminum oxide mineral cuts sharp but is still friable, fragmenting under heat and pressure to reveal sharp cutting edges, so you get a consistent cut throughout the life of the abrasive. Available in grades 24 to 320 grit, you can choose the right grade for your project, depending how aggressive a scratch you desire. Coarser grades, like 24, are good for heavy stock removal, whereas finer grades, like 320, are good for metal finishing and polishing.

Tips for Optimal Use
Standard Abrasives™ Spiral Bands are intended for use with rubber drums. The single ply or "single thickness" abrasive fits snugly around the drum like a glove. Compared to 2- or 3-ply thicknesses, the single ply is a bit more flexible and conformable, which makes it a good match for contoured surfaces. It is important for both the drum and the abrasive to have the same nominal diameter to prevent skipping and bumping.

Rather than deflecting or skidding over the substrate, the Spiral Band stays in constant contact with the workpiece to swiftly rid the surface of little burrs. The maximum allowable RPM for spiral bands is the same as the maximum RPM of the drum, provided the drum and band have the same nominal diameter. Typically, the rubber drum attaches to portable drills, die grinders, straight shaft and angle grinders. The great news is, the drum requires no extra tools for band changes.

Removing contaminants from flat and contoured surfaces is smooth – in finish and operation.

Trusted Brand And Model

The Standard Abrasives A/O Spiral Band 707115 offers reliable performance with its well-known brand and model. This product is designed specifically for users who need consistent results in abrasive tasks.

Its aluminum oxide mineral ensures sharp cutting edges, making it ideal for polishing and blending. The model 707115 is part of a trusted lineup that professionals rely on for quality finishes.

Precise Size And Format

This spiral band measures 1 inch by 1 inch, providing a compact size that fits easily into tight spaces. The single ply abrasive format allows it to flex and conform to both flat and contoured surfaces.

The spiral construction helps the band roll smoothly over surfaces, reducing shadow marks and chatter. Its size and format make it perfect for detailed finishing and deburring tasks.

Wide Grade Range

Available in grades from 24 to 320 grit, this product covers a broad spectrum of abrasive needs. Coarser grades like 24 are great for heavy stock removal, while finer grades like 320 excel at polishing and finishing.

Choosing the right grade from this range ensures you get the desired scratch pattern and surface quality. This versatility makes the spiral band suitable for various metalworking projects.

Easy Use And Compatibility

The spiral band fits easily over rubber drums without requiring any tools for band changes. This feature saves time and effort during abrasive work, allowing for quick adjustments on the job.

Designed to work with portable drills, die grinders, and angle grinders, it offers broad compatibility. The single ply thickness provides flexibility, making it ideal for contoured surfaces.

Bulk Pack Convenience

This product comes in a pack of 100 pieces per case, ensuring you have plenty of abrasive bands for extended use. The bulk packaging is cost-effective and reduces the need for frequent reordering.

Having 100 spiral bands on hand supports continuous work without interruption. The pack size suits workshops and professionals who require a steady supply of abrasives.