Scotch-Brite Roloc Clean and Strip XT Pro Extra Cut Disc, XC-DR, A/O XCRS, GRN, TR, Green, 3 in, DieQ300V, 10/Carton, 40 ea/Case

• Aluminum oxide mineral aggressively removes top layer and cleans to the bare metal underneath
• High conformability provides a larger contact patch for faster removal rates
• High speed rating and low vibration
• High-strength fiber resists chunking and performs well on edges
• Quickly removes heavy rust, thick paint, corrosion and cleans welds
• Requires use of Roloc backup pad (sold separately)
• Resists loading for consistent cutting action
• Roloc attachment system makes disc changes easy

Scotch-Brite Roloc Clean and Strip XT Pro Extra Cut Disc features aluminum oxide abrasive mineral incorporated into an open nylon web. It is designed to remove heavy rust, thick paint and corrosion while also scratching the base material underneath, which can save you time. The highly conformable, high-strength fibers resist chunking and loading, and they perform well on edges.

Take Advantage of High Conformability
With its reengineered fiber type, the Scotch-Brite Roloc Clean and Strip XT Pro Extra Cut Disc allows operators to take advantage of all the benefits that come with increased conformability without compromising strength. With increased conformability, this disc achieves a larger contact area with the workpiece for faster removal rates. It also conforms to weld bead ripples to polish welds without removing them, and works in hard-to-reach areas without damaging the substrate.

In addition to its high conformability, the Scotch-Brite Roloc Clean and Strip XT Pro Extra Cut Disc offers low vibration, decreased chunking, a high speed rating and long life. That all adds up to a disc you can spin onto your angle grinder with confidence.

Save Time with Aluminum Oxide
We designed our Scotch-Brite Roloc Clean and Strip XT Pro Extra Cut Disc with aluminum oxide abrasive mineral because of its ability to remove heavy coatings and simultaneously scratch and clean to the bare metal underneath without leaving divots. This means that operators can remove a coating from a workpiece and get it ready for welding or adhesive application with the same disc – saving the time of switching abrasives.

Spongy Web, Sharp Mineral
To engineer our Scotch-Brite Roloc Clean and Strip XT Pro Extra Cut Disc, aluminum oxide mineral is combined with non-woven nylon fibers using resin. Aluminum oxide is a very hard mineral that delivers a high cut rate, commonly used in high-pressure applications like cutting and weld removal. The resin bond strengthens the fiber web and allows it to gradually break down to reveal new fibers and sharp mineral – delivering a consistent cut over the life of the abrasive. The combination of fiber strands, resin and abrasive mineral forms a thick, open web. Gaps in the web allow swarf to escape, minimizing loading of the abrasive.

Roloc Makes Tool Attachment Easy
This disc comes with the added benefit of a Roloc attachment. Operators can quickly and swiftly attach the disc to a Roloc backup pad (sold separately) that connects to the power tool. Altogether, Roloc attachment systems help enhance productivity by minimizing the time it takes to set up disc and tool connections.

Applications

• Removing heavy rust
• Removing rust pits
• Removing thick paint
• Removing corrosion
• Removing weld discoloration
• Weld cleanup