Scotch-Brite Roloc + Clean and Strip Disc 7466, 4 in x 1/2 in, S XCS, Case of 10

• Extra coarse (XCS) grade silicon carbide provides aggressive cutting and leaves a fine finish without gouging the workpiece
• Load resistant material resists clogging for consistent cutting action
• Removes paint, rust and quickly without compromising the geometry of the workpiece
• Roloc attachment system provides easy disc change out for multi-step finishing processes
• Smear resistant properties avoid extra cleaning of the work surface

Ideally suited for rust, coating and weld discoloration removal the Scotch-Brite Roloc Clean and Strip Disc is a long-lasting abrasive that combines silicon carbide mineral with non-woven nylon fibers. This unique disc can aggressively clean without significantly altering the base material.

Roloc™ Attachment for Swift Disc Changes

The Scotch-Brite™ Roloc™ Clean and Strip Disc binds silicon carbide mineral and non-woven nylon fibers using resin. Resin dissolves and breaks down over time, helping the abrasive stay strong and resist heat. With the convenience of the Roloc™ attachment system, disc change-out for multi-step finishing processes is both quick and easy. The disc swiftly mounts to a holder pad (sold separately) which, subsequently attaches to abrasive tools like die grinders and right angle disc sanders.

Silicon Carbide Mineral
The Scotch-Brite™ Roloc™ Clean and Strip Disc uses silicon carbide, because it's a very sharp synthetic mineral that is commonly used for low-pressure applications such as paint prep. While it breaks down faster than aluminum oxide, it produces a superior finish. The extra coarse (XCS) mineral works hard to remove unwanted corrosion and blemishes from a variety of substrates. It aggressively removes paint and rust from seams, door jambs, drip moldings, pinchwelds and other difficult-to-reach areas.

The Many Benefits of Open Web Abrasives
Nonwoven technology makes our Scotch-Brite™ industrial abrasives unique. A combination of fiber strands, resin, and abrasive mineral forms a thick, open web. The spring-like nature of the fibers responds to contours and effectively removes unwanted burrs, soils, and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and boosts productivity. Gaps in the web allow swarf to escape, so debris does not clog the mineral.

Fibers in the web continually break down with use to reveal fresh mineral for exceptional consistency, superior cut performance, and extremely long service life. From aesthetic finishing to weld blending, deburring, and more, Scotch-Brite abrasives work fast and deliver consistent results, part after part

Scotch-Brite Roloc Model

The Scotch-Brite Roloc + Clean and Strip Disc 7466 is designed for efficient surface preparation. This model combines the trusted Scotch-Brite brand with the Roloc attachment system for quick and easy disc changes during multi-step finishing.

Its unique design supports aggressive cleaning while maintaining the workpiece's geometry. The model 7466 is ideal for removing rust, paint, and weld discoloration without damaging the base material.

Extra Coarse Grade Benefits

This disc features an extra coarse (XCS) grade silicon carbide mineral that provides aggressive cutting power. The XCS grade ensures a fine finish without gouging, making it perfect for tough surface prep tasks.

Using this grade helps remove corrosion and blemishes effectively. It works well on seams, door jambs, drip moldings, and other hard-to-reach areas, delivering consistent results.

Disc Dimensions And Format

The disc measures 4 inches in diameter by 1/2 inch thick, providing a balanced size for both control and coverage. This dimension supports various abrasive tools like die grinders and right angle disc sanders.

Its Roloc format allows it to mount swiftly to a holder pad (sold separately), making disc changes fast and convenient during finishing processes.

Durable Material And Pack

The disc uses load-resistant material that resists clogging, ensuring consistent cutting action throughout its use. This durability extends the disc's service life and maintains performance.

It comes in a pack of 10 discs per case, providing enough quantity for multiple projects or extended use without frequent reordering.

Cleaning And Strip Features

The Clean and Strip Disc quickly removes paint and rust without compromising the workpiece's shape. Its smear-resistant properties reduce the need for extra cleaning after use, saving time.

Nonwoven nylon fibers combined with silicon carbide mineral create an open web that effectively clears debris. This design helps maintain the disc's cutting ability and prevents clogging during operation.