Scotch-Brite HS Blend and Finish Disc, BF-DC, A/O Medium, 6 in x 1/2 in, Case of 100

• Aluminum oxide medium grade mineral efficiently removes weld burns, small burrs, and rust
• Constructed with the toughest Scotch-Brite web material, making it a great choice for weld burn removal, deburring, blending, finishing and rust removal
• Discs can be used individually or stacked on a straight shaft tool or bench motor for a broader cleaning surface
• Load resistant open web construction provides extended use
• Springy fibers conform to irregular surfaces with uniform results
• Superior durability and cut make the disc long-lasting

The Scotch-Brite HS Blend and Finish Disc aggressively tackles weld burns and refinement, deburring and rust removal – leaving a consistent satin finish on the workpiece. Among Scotch-Brite surface conditioning discs, HS material features the toughest, most aggressive web.

Conformable, Durable Blending and Burr Removal
Made with aluminum oxide mineral, this high-strength open web disc combines conformability with superior durability and cut – so you get the job done faster and are left with a great finish. If you are using wire wheels or scrapers, but dislike their inability to get into tight spots, replace them with the HS Blend & Finish Disc. Scotch-Brite conformability allows you to access hard-to-reach areas. This long-lasting, highly efficient disc is also load-resistant to stand up to prolonged use and can significantly lower your abrasive costs while increasing productivity.

Our Blend and Finish Disc won’t sacrifice part geometry, and can be used with a bench motor, disc sander or die grinder to eliminate the effort of manual scraping. When the work surface requires broader coverage to reach intricate areas with the outer diameter of the disc, multiple discs can be stacked on a straight shaft tool or bench motor.

Fast Cut and Long Life
Aluminum oxide is a popular choice among industrial professionals due to its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Its high cut-rate, hardness, strength, and low heat retention all combine to make aluminum oxide mineral a good choice in grinding applications. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.

The Scotch-Brite Advantage
Scotch-Brite industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers. Fibers in the web continually break down with use to reveal fresh mineral for exceptional consistency, superior cut performance, and extremely long service life. Scotch-Brite products not only enhance productivity, but may also reduce the need for cleaning chemicals, pastes, and wire brushes. From aesthetic finishing to weld blending, deburring, and more, Scotch-Brite abrasives work fast and deliver consistent results, part after part.

Scotch-Brite HS Blend

The Scotch-Brite HS Blend and Finish Disc, model BF-DC, offers reliable surface conditioning with its aluminum oxide medium grade mineral. This brand is known for efficiently removing weld burns, small burrs, and rust, making it a trusted choice for industrial use.

Designed with the toughest Scotch-Brite web material, this disc excels in weld burn removal, deburring, blending, finishing, and rust removal. Its durable construction ensures consistent performance throughout its lifespan.

Medium Grade Mineral Benefits

This disc uses a medium grade aluminum oxide mineral, which provides a fast cut rate and long life. The mineral self-fractures during use, exposing fresh cutting edges that maintain efficiency and reduce wear compared to traditional abrasives.

Aluminum oxide is suitable for a wide variety of substrates, including ferrous alloys, making this disc versatile for both woodworking and metalworking applications.

Disc Size And Format

The disc measures 6 inches in diameter and 1/2 inch thick, providing a balanced size for detailed work and broader surface coverage. Its format allows it to be used individually or stacked for larger cleaning surfaces.

Compatible with straight shaft tools or bench motors, this format increases flexibility and efficiency, especially when working on intricate or hard-to-reach areas.

Durable Open-Web Construction

The load-resistant open web design extends the disc’s usable life by preventing clogging and maintaining cutting performance. The springy fibers conform to irregular surfaces, ensuring uniform results on complex shapes.

This construction also helps the disc run cool during use, reducing heat buildup and preserving part geometry, which is essential for precision finishing tasks.

Pack Count And Usage

Available in a pack of 100 discs per case, this quantity supports high-volume industrial operations and reduces the frequency of reordering. The pack size is ideal for workshops needing consistent supply for ongoing projects.

Using the Scotch-Brite HS Blend and Finish Disc with bench motors, disc sanders, or die grinders eliminates manual scraping effort and improves productivity across various surface conditioning tasks.