3M Trizact Hookit Foam Abrasive Disc 02087, 3000, 3 in (76 mm), 15 Discs/Carton, 4 Cartons/Case

• 3M Trizact abrasives have unique three-dimensional abrasive structures which are distributed across the abrasive surface. As the structures wear, fresh mineral is exposed, delivering consistent finishes and longer disc life.
• Allows technicians to refine paint scratches using a lighter dual-action sander instead of a heavier polisher.
• Available in 3-, 5-, and 6-inch diameter discs as well as 2 3/4 x 5 1/2-inch sheets.
• Compared to traditional buffing, using 3M Trizact Abrasives for removing sand scratches can reduce the possibility of swirl marks, burn through, and other defects caused by more aggressive processes.
• Foam backing provides plenty of control and consistent contact with the surface –great for preserving orange peel.
• Reduce the need for aggressive compounding with 3000-grade 3M Trizact Hookit Foam Abrasive Discs for paint finishing.
• These 3000-grade 3M Trizact Hookit Foam Abrasive Discs help increase shop productivity by eliminating the need for aggressive wool compounding pads and reducing polishing time.
• They help refine curly Q's, pigtails, and other inconsistent sand scratches.
• Used damp, they deliver long life and less loading than dry sanding.
• When used with other 3M Trizact abrasives and a 3M Perfect-It Paint Finishing system, they can reduce overall polishing time.
• When using a dual-action sander, make at least five passes with 50% overlap.

Spend less time compounding and enjoy less risk of defects by using 3000-grade 3M Trizact Hookit Foam Abrasive Discs for paint finishing. Used for refining 1500- and 2000-grade sand scratches, they can reduce the need for aggressive wool compounding and cut overall paint finishing time. The patented 3M Trizact abrasives are engineered for consistent cut and long life. You'll see long abrasive life and consistent finishes thanks to the patented 3M Trizact Abrasives. They are built with our unique three-dimensional structures which wear to reveal fresh, sharp abrasive mineral. 3M Trizact Hookit Foam Abrasive Disc 3000 can reduce the risk of heavy swirl marks which can be introduced during aggressive compounding. Used damp, they deliver the anti-loading benefits of wet sanding without the productivity-reducing hydroplaning which can happen when power sanding on overly-wet surfaces. The foam backing provides plenty of control and consistent contact with the surface - great for preserving orange peel. Can be used with a soft interface pad for added conformability over curved surfaces. When used with other 3M Trizact abrasives and one of the 3M Perfect-It Paint Finishing Processes, they can reduce overall polishing time. 3M Trizact Hookit 3000-grade Foam Abrasive Discs are available in 3-, 5-, and 6-inch diameter discs and 2 3/4 x 5 1/2-inch sheets.