3M PPS Series 2.0 Spray Cup System Kit 26328, Micro (3 fl oz, 90 mL), 125 Micron Filter, 1 Kit/Case

• 3M PPS (Legacy) red dispensers can be used with 3M PPS Series 2.0
• 3M PPS Series 2.0 is our next generation, highest performing disposable spray cup system
• 3M PPS reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by up to 50%
• compared to conventional paint cup systems
• A new reusable hard cup is included in every lid/liner kit
• Domed lid geometry and a wider fluid spout allows up to 3 fl. oz. (90 mL) of material to be held below the filter reducing inconsistent spray due to air-entrapment and sputter
• Enlarged sealing plugs provide stable base for cups to be placed upside down, keeping filters wet during temporary sealing and protection of coatings not in use
• Full-diameter filters are built into every lid for the highest quality filtration
• aids with fluid flow
• Mixing ratios are printed on each cup and a clear access window allows users to grasp liner while removing the lid, making tinting/refilling easier
• New quarter-turn lid locking system locks lid to cup and eliminates paint build up and cross threading
• Redesigned adapters provide four points of connection from spray gun to lid, improving stability and confidence especially in large applications

3M PPS Series 2.0 Spray Cup System is our next generation, highest performing disposable spray cup system for mixing/measuring, filtering, spraying in any direction (360° spray rotation) and protecting coatings not in use. Each lid and liner kit contains 50 disposable lids with integrated collars and full diameter filters, 50 disposable liners, 1 reusable hard cup and 32 sealing plugs.

The Heart of 3M™ PPS™ Series 2.0
3M™ PPS™ Series 2.0 Kit features the next generation of the 3M™ PPS™ paint preparation system. It contains all of the reusable, disposable components of the system: 50 disposable lids with integrated collars and full diameter filters, 50 disposable liners, 1 reusable hard cup and 32 sealing plugs. The 3M™ PPS™ system features disposable  lids, liners and hard plastic cups in 5 sizes: 3oz (90mL), 6.8oz (200mL), 13.5oz (400mL), 22oz (650mL) and 28oz (850mL). A choice of sizes offers maximum efficiency for every job, and helps lower your cost per use. 

Next Generation of the 3M™ PPS™ Paint Preparation System
The 3M™ PPS™ Series 2.0 Spray Cup System is our latest, best-performing disposable spray cup system. The system has been redesigned from the connection to the cup, and has been improved in six ways offering a complete disposable spray cup solution for mixing/measuring, filtering, spraying and for temporary sealing and protection of sprayable coatings.

Cleanest Disposable Cup System
Every PPS™ Series 2.0 lid features a quarter-turn lid locking system to help reduce paint build-up and possible contamination. Additionally, each lid and liner kit contains a new hard cup which also features universal mixing ratios built into the cup, eliminating the need for separate inserts and helping ensure the most accurate mix possible.

Reduce Material Waste by Mixing in the Cup
3M™ PPS™ Series 2.0 makes it even easier to mix directly in the cup. If you’re mixing on a scale, use the “max fill” notation on each cup to fit the maximum amount. Cups include a clear access window to help you see how much material is left while spraying. The window also allows you to hold the liner for easier, cleaner lid removal. This is especially useful during refills or tinting.

Improved Fluid Flow for More Consistent Paint Application
Our 3M™ PPS™ Series 2.0 Lids feature a domed geometry that allows up to 3 oz (90mL) of material below the filter during on-demand spraying. This reduces sputter and other inconsistencies in spray performance. Lids also feature a wider spout for improved fluid flow. A built-in full-diameter filter delivers the highest quality filtration – no assembly needed.

More Confidence in the Connection to Your Gun
A new adapter design provides a four-point connection and a wider 360° platform to ensure a stable, reliable lid-to-spray-gun connection. Larger sealing plugs do more than just seal. For instance, you can turn the cup upside down and use the new sealing plug as a base for temporary sealing and protecting, helping keep the built-in filter wet and reducing the need for replacement lids.

A System for Both Solvent-Based and Waterborne Products
Every lid features a built-in full diameter filter available in 200 micron or 125 micron mesh. Be sure to consult the paint or coatings manufacturer for the recommended filter mesh size.

Use the Right Size Cup for Every Repair
Our PPS™ 2.0 Spray Cup System is available in 5 sizes: 3 oz (90mL), 6.8 oz (200mL), 13.5 oz (400mL), 22 oz (650mL) and 28 oz (850mL). Using the right size cup for every repair not only reduces your cost per lid and liner, it can reduce the likelihood of overmixing.

Reduce Solvent Usage by up to 70%
After spraying, the painter can use the sealing plug to seal and protect the paint or coating for later use or simply discard the lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in accordance with local government requirements. Use a small amount of solvent for cleaning the spray gun and the PPS™ Adapter. Shops using PPS™ Series 2.0 often experience a 70% reduction in cleaning solvent usage. Most guns can be cleaned with less than 3 oz. of solvent.

Your Spray Gun Functions at any Angle, Even Upside Down
Because PPS™ Series 2.0 is a closed system, you can spray in any orientation to a full 360 degrees. This allows the painter to spray consistently at 90° to the part, no matter how the part is positioned. It makes material transfer more consistent, limits paint overspray and reduces paint consumption.

Reduces the Chance of Contamination Between Jobs
Because the painter uses a new disposable lid and liner for each mix, there is less risk of outside contamination. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%. 

The Bottom Line: Why 3M™ PPS™ Series 2.0 is the Disposable Cup of Choice
3M™ invented disposable cups for paint application and will continue to re-invent based on our customer’s feedback. What customers have taught us, is that trust and confidence in their disposable paint cup system is king. The consistent performance of the 3M™ PPS™ System has earned the trust of experts in one of the most important parts of a repair or manufacturing process – paint application. PPS™ Series 2.0 is the culmination of more than 15 years of painter feedback and a true next generation all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%.

Trusted 3M PPS Series

The 3M PPS Series 2.0 Spray Cup System Kit 26328 offers a reliable solution for paint preparation. This kit includes the Micro size cup with a 3 fl oz (90 mL) capacity, designed for precise mixing and spraying. The 3M brand ensures quality and consistency in every use.

With the exact model 26328, this system features a 125 Micron Filter for superior filtration. The kit comes as 1 Kit/Case, making it convenient for professional or personal use. The 3M PPS Series 2.0 is recognized for its next-generation disposable spray cup technology.

Efficient Material Handling

The 3 fl oz (90 mL) Micro cup size is perfect for small to medium paint jobs, reducing waste and improving accuracy. This capacity allows users to mix just the right amount of material, minimizing leftover paint and saving costs.

Each cup includes printed mixing ratios and a clear access window, making tinting and refilling easier. The system’s design supports efficient paint preparation and application, helping users maintain control over their materials.

Advanced Filtration System

The 125 Micron Filter integrated into every lid ensures high-quality filtration, preventing contaminants from affecting the paint finish. This feature is crucial for achieving smooth, professional results with every spray.

Filters are full diameter and built into the lid, eliminating the need for assembly and reducing the risk of errors. This system supports both solvent-based and waterborne products, offering versatility for various coatings.

Durable Spray Cup Design

The kit includes a reusable hard cup that complements the disposable lids and liners, enhancing durability and reducing waste. The domed lid geometry and wider fluid spout hold up to 3 fl oz (90 mL) below the filter, improving fluid flow and spray consistency.

Redesigned adapters provide a stable four-point connection to the spray gun, ensuring confidence during large applications. The system’s design supports 360° spray rotation, allowing the gun to function at any angle, even upside down.

Complete Kit Convenience

This 3M PPS Series 2.0 Spray Cup System Kit 26328 comes as a complete set with 1 Kit/Case, including disposable lids, liners, sealing plugs, and the reusable hard cup. This all-in-one format simplifies setup and cleanup for users.

Using the right size cup and having all components in one kit reduces prep and cleanup time by up to 50%. The system also cuts cleaning solvent use by up to 70%, making it an economical and environmentally friendly choice.