3M PPS Lid & Liner Kit 16325, Large (28 fl oz, 850 mL), 125 Micron Filter, dia, 25 Lids and Liners/Kit, 1 Kit/Case

3M PPS Lid & Liner Kit 16325, Large (28 fl oz, 850 mL), 125 Micron Filter, dia, 25 Lids and Liners/Kit, 1 Kit/Case

PPS

SKU:
7010029845
$89.72 Per Case
Adding to cart… The item has been added
UPC:
00051131163256
Weight:
2.80 LBS
Width:
13.80 (in)
Height:
5.30 (in)
Depth:
15.80 (in)
  • Product Description
    • Available for PPS Cups & Collars in five sizes (90mL – 850mL
    • 3 fl oz - 28 fl oz) for jobs ranging from spot repairs to 4-panel repairs
    • Designed for use with 3M PPS (Legacy) paint preparation system
    • Kits contain disposable lids with micron filters, liners and sealing plugs
    • PPS is an all-in-one disposable solution for measuring, mixing, filtering, and spraying of paint materials
    • PPS reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by as much as 50% compared with conventional paint cup systems
    • Reduces the chance of outside contamination, delivers consistent material transfer and helps reduce paint consumption
    • Sealing plugs allow for temporary sealing and protection of non-catalyzed paint materials
    • Stock PPS Lids & Liners efficiently and cost-effectively
    • System enables the painter to consistently spray at 90 degrees to the part, no matter the part orientation (even upside down)
    3M PPS Lid & Liner Kits each contain 50 disposable lids with welded-in filters to strain paint material while spraying, along with 50 liners and 20 sealing plugs for use with the 3M Paint Preparation System. Kits are available in five sizes for a range of jobs large and small. PPS is a complete painting system that allows the painter to measure, mix, filter and spray paint materials.

    Kits for Added Efficiency with 3M PPS
    Excellent for efficiently stocking PPS lids, liners and related components, 3M PPS Lid & Liner Kits contain disposable lids, disposable liners, and sealing plugs specifically for use with the 3M PPS (Legacy) paint preparation system. Each PPS lid features a welded-in filter which effectively strains paint material during application. Choose lids with 125 micron filters, which are often recommended for waterborne paint materials; or 200 micron filters for traditional solvent-based paint materials. Always reference your paint manufacturer to ensure the recommended filter to strain the material.

    Lids and liners are sized specifically for the range of 3M PPS Cups & Collars, allowing technicians to mix up to 28 fluid oz (850 mL). Correct mixes are best achieved when also using with a 3M PPS Mix Ratio Insert, or a weight scale. Mix ratio film inserts are sold separately. Lid and liner sizes include:

  • 3M PPS Lid & Liner Kit Micro Size – 50 lids, 50 liners and 20 sealing plugs for use with 3 fluid oz (90 mL) PPS Cups & Collars, ideal for spot repairs
  • 3M PPS Lid & Liner Kit Mini Size – 50 lids, 50 liners and 20 sealing plugs for use with 6 fluid oz (180mL) PPS Cups & Collars, excellent for 1-panel repairs
  • 3M PPS Lid & Liner Kit Midi Size – 50 lids, 50 liners and 20 sealing plugs for use with 13.5 fluid oz (400mL) PPS Cups & Collars, great for 2-panel repairs
  • 3M PPS Lid & Liner Kit Standard Size – 50 lids, 50 liners and 20 sealing plugs for use with 22 fluid oz (650mL) PPS Cups & Collars, excellent for 3-panel repairs
  • 3M PPS Lid & Liner Kit Large Size – 25 lids, 25 liners and 10 sealing plugs for use with 28 fluid oz (850mL) PPS Cups & Collars, ideal for 4-panel repairs

3M PPS UV Standard Lid & Liner Kits are also available, featuring PPS lids, liners and sealing plugs in black instead of transparent to keep out UV light. These kits are recommended for use when applying UV light curing materials such as primer, sealer, base-coat and clear coats.

Advantages of the 3M™ PPS™ System
Unlike conventional paint cup systems, our 3M™ PPS™ eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™ Cup. Then simply mix the paint in the PPS™ disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™ System. With just these few simple steps, you're ready to start spraying.

Your Spray Gun Functions at any Angle, Even Upside Down
PPS™ allows the painter to spray consistently 90° to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation -  i.e. 360 degrees.

Clean Up is a Breeze and Uses Less Solvent
After spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard the disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS™ adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 fl. oz of solvent.

A Versatile System that Works with Most Spray Guns
Specifically designed PPS™ stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun. Painters also have the option to use the 3M™ Accuspray™ ONE spray gun, which requires no adapters. Technicians have found that using the PPS™ system in conjunction with the Accuspray™ spray gun further reduces cleaning solvent usage. 

Reduces the Chance of Contamination Between Jobs
Because the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components often improves overall productivity in prep and clean-up time by as much as 50%. 

The Bottom Line: Why 3M is the Paint and Coatings Spray System of Choice
3M™ PPS™ is an all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%. You'll find that technicians operate with greater efficiency and spend less time on cleaning tasks. 3M PPS offers many advantages for anyone spraying liquid coatings from a spray gun with cup.

Trusted 3M PPS System

The 3M PPS Lid & Liner Kit 16325 is designed specifically for the 3M PPS (Legacy) paint preparation system. This kit includes disposable lids with welded-in filters, liners, and sealing plugs that streamline the painting process. Using this system helps reduce paint waste and contamination.

With the 3M brand backing this kit, you get reliable quality and compatibility with 3M PPS Cups & Collars. The model 16325 supports efficient paint mixing, filtering, and spraying, making it a preferred choice for professional painters.

Large 28 Fluid Ounce Capacity

This kit supports a large size capacity of 28 fluid ounces (850 mL), ideal for bigger paint jobs such as 4-panel repairs. The size allows painters to mix and spray larger volumes of paint without frequent refills, improving workflow efficiency.

Perfect for extensive repairs, the 28 fl oz capacity matches the 3M PPS Cups & Collars designed for this volume. This ensures proper fit and optimal performance during paint application, reducing downtime and material waste.

High Quality 125 Micron Filter

The lids in this kit feature a 125 micron filter that effectively strains paint materials during spraying. This filter size is often recommended for waterborne paint materials, helping to ensure a smooth, contaminant-free finish.

Using the 125 micron filter reduces the chance of outside contamination and delivers consistent material transfer. This helps painters achieve better results while minimizing paint consumption and overspray.

Complete Kit Pack Count

The 3M PPS Lid & Liner Kit 16325 includes 25 lids, 25 liners, and 10 sealing plugs per kit. This pack size balances supply and convenience, providing enough components for multiple paint jobs without excess waste.

Having 25 lids and liners ensures painters can maintain a fresh, disposable setup for each job, which improves productivity and reduces cleaning time. The included sealing plugs allow temporary sealing of non-catalyzed paint materials.

Efficient Disposable Format

This kit uses a disposable format that simplifies paint preparation and cleanup. The lids and liners are designed for single use, reducing solvent consumption by up to 70% and cutting cleanup time by as much as 50% compared to traditional systems.

The disposable design also supports consistent spraying at any angle, including upside down, thanks to the 3M PPS system. This versatility helps painters work more efficiently and with less paint waste.