3M Hookit Disc Pad, 05779, 8 in, 1 per case

• Choose pads designed for 1,500 to 12,000 maximum rpms for a variety of uses
• Disc pads designed to save time and money on specific auto body projects
• Hookit attachment system enables easy disc change-out, maximizing abrasive disc life
• Medium density foam construction provides support and flexibility for finer finishing and longer pad life
• Tapered edges from 15 degrees to 45 degrees make it easy to sand on flat or contoured surfaces

Hookit Abrasive Disc Pads bring new levels of efficiency and performance to a broad range of auto body projects. Specific pads are tapered for sanding projects on flat surfaces or contours, low speed or high. Disc pads feature the Hookit attachment system for use with a range of Hookit abrasive discs, affording quick change-outs and longer life of disc pads and discs.

Improved Sanding for a Broad Range of Projects
You’ll find a Hookit Abrasive Disc Pad for a broad range of auto body projects including shaping plastic filler, paint stripping, primer sanding and low-speed polishing or grinding. Medium density foam bodies provide support for 3M Abrasive Disc Pads (sold separately), yet also provide some flex for good conformability. Discs are available in standard or low profile, and tapered edges range from 15 degrees to 45 degrees, good for flat sanding or for contoured edges, low-speed polishing and featheredging.

Specific Hookit Abrasive Disc Pads fit a range of sanding equipment including Chicago Pneumatic 777 sanders, National Detroit 900 and Dynabrade Model 57700 sanders or standard (5/8" shaft) slow-speed polishers.Choose back-up pads designed for use at maximum rpms from 1,500 to 12,000.

About Our Hookit Attachment System
The Hookit hook-and-loop feature makes disc attachment, removal, and re-attachment clean and easy, and facilitates use and re-use of the disc for the full extent of its abrasive life. Hookit disc pads have J-shaped hooks of the type most commonly used in everyday hook-and-loop applications. Hookit disc pads grip the brushed nylon loop backings of 3M Hookit discs and provide a finer finish than do adhesive backed discs. The Hookit system is designed for work spaces and applications where adhesive backed discs may become contaminated by dust, dirt, or flying debris.

Better Ways to Sand from 3M
Our Hookit Abrasive Disc Pad showcases many of our technologies for better auto body projects, from the material to the taper to the density to the attachment system. Auto body professionals can get the most out of their sanding projects and their operations.

Trusted 3M Hookit Quality

The 3M Hookit Disc Pad, model 05779, offers reliable performance for auto body projects. This pad uses the Hookit attachment system, making disc changes quick and easy while extending abrasive disc life.

Designed specifically for professionals, this 8 inch disc pad ensures consistent results. Its medium density foam construction supports finer finishing and longer pad life, meeting the demands of various sanding tasks.

Efficient Disc Attachment System

The Hookit attachment system featured in the 3M 05779 pad allows clean and simple disc removal and re-attachment. This system grips the nylon loop backing of Hookit abrasive discs, providing a secure hold without adhesive mess.

This design helps maintain disc quality by reducing contamination from dust and debris. It’s ideal for workspaces where adhesive-backed discs might fail, ensuring longer use of both discs and pads.

Versatile Size And Format

This 3M Hookit Disc Pad measures 8 inches, fitting a wide range of sanding equipment. Its size supports both flat and contoured surface sanding, thanks to tapered edges that range from 15 to 45 degrees.

The pad’s format suits various auto body projects, including shaping plastic filler and paint stripping. Its medium density foam also provides flexibility for detailed finishing on different surfaces.

Wide RPM Compatibility Range

The 3M 05779 disc pad is designed for use at maximum speeds from 1,500 to 12,000 RPM. This range covers many sanding applications, from low-speed polishing to higher-speed grinding tasks.

Such compatibility makes this pad suitable for equipment like Chicago Pneumatic 777 sanders and Dynabrade Model 57700 sanders. It ensures you get the right performance for your specific project needs.

Single Pad Per Case

This product comes as one 8 inch disc pad per case, making it easy to order exactly what you need. The single pack format suits professionals who want to test or replace pads without excess inventory.

Having one pad per case also simplifies storage and handling. It’s a practical choice for those managing multiple sanding tools or working on varied auto body projects.