3M Dynamic Mixing System Nozzle, 55847, 50 per bag, 6 bags per case

• Active mixing action thoroughly blends materials for precision mixing every time
• Easy clip-on/off application to cartridges saves time
• Nozzle extensions are available to reduce bead size when extruding adhesive and sealants
• Nozzles colored by product line help ensure trouble-free application for adhesives, sealants, fillers and glazes
• Reduces mess and cleanup – no hand mixing is needed for fillers and glazes
• Short length limits material left inside the nozzle

The 3M Dynamic Mixing System Nozzle is integral to fast, accurate mixing of two-part body repair products. Nozzles are specially designed for low-waste mixing that thoroughly blends material to specific ratios. Choose the DMS 1.0 red nozzle for fillers and glazes, and purple nozzles for DMS 1.5 adhesives and sealers. Nozzle extensions are available for adhesives and sealants to reduce bead size.

Designed for Fast, Accurate Mixing and Application
As an integral part of our Dynamic Mixing System, our 3M™ Dynamic Mixing System Nozzle has been designed specifically for dispensing accurately mixed two-part DMS 1.0 and DMS 1.5 products, including epoxies, fillers, glazes, adhesives and sealers in collision repair. These mixing nozzles completely blend materials according to specified mixing ratios, and clip onto cartridges easily. They remove just as easily for maximum efficiency.

We have designed our Dynamic Mixing System Nozzle to make the application of any DMS product more efficient. Choose a red-colored nozzle (05847) for DMS 1.0 products (fillers and glazes). For DMS 1.5 – adhesives and sealers – choose nozzles with the purple color (55847). Nozzle extensions are available for extruding DMS 1.5 products into hard to reach places.

About the 3M™ Dynamic Mixing System for Fillers and Glazes
With our Dynamic Mixing System dispenser and mixing nozzles, there is no need to worry about adding too much – or too little – hardener to filler and glazes. Dispense products when and where you want them, at the touch of a trigger. There is no messy mixing process, reduced wasted materials, and reduced time for cleaning up. By utilizing the correct amount of product and reducing consumption, you can save both materials and time.

3M™ Dynamic Mixing System: As Easy as Twist, Mix and Fix
Here is how it works: Twist a cartridge into place on the applicator until it locks into place. For fillers and glazes, attach a red mixing nozzle and mix the two-part component product automatically by simply pulling the trigger on the applicator.

For adhesives and sealers, attach a purple mixing nozzle after equalizing the cartridge. Watch as it mixes and dispenses an accurate ratio of product. Fix, bond or seal instantly by applying the product directly from the applicator to the surface and spread into place.

3M Dynamic Mixing System

The 3M Dynamic Mixing System Nozzle, model 55847, is designed for precise two-part mixing. This system ensures thorough blending of materials, making it ideal for body repair products that require accuracy.

Its active mixing action blends materials consistently, while the clip-on/off feature saves time during application. This nozzle is part of a trusted brand known for quality and reliability in repair tasks.

Efficient Pack Size Delivery

Each bag contains 50 nozzles, and there are 6 bags per case, providing a total of 300 nozzles. This pack size supports continuous work without frequent reordering, ideal for busy workshops.

The packaging format helps keep nozzles organized and accessible, reducing downtime. Having multiple bags per case also allows for easy distribution across different job sites or teams.

Precise Mixing And Application

The nozzle is engineered to mix two-part products like fillers, glazes, adhesives, and sealants accurately. This precision reduces waste and ensures the correct ratio of components every time.

Color-coded nozzles help distinguish between product lines: red for DMS 1.0 fillers and glazes, and purple for DMS 1.5 adhesives and sealers. This simplifies selection and prevents application errors.

Compact Size Limits Waste

The nozzle’s short length design limits the amount of material left inside after use. This feature reduces waste and cleanup time, making the process more efficient and cost-effective.

Nozzle extensions are also available to reduce bead size when extruding adhesives and sealants, allowing for precise application in hard-to-reach areas or detailed work.

Easy Use And Cleanup

The nozzles clip on and off cartridges easily, speeding up the application process. This convenience helps technicians work faster without compromising accuracy or quality.

Because no hand mixing is needed, mess and cleanup are minimized. This system supports a cleaner workspace and reduces the time spent on maintenance after each job.