3M Dirt Trap Clear Film Dispenser, 36863, 1 per case

• An approved component of the 3M Dirt Trap Protection System
• Conveniently dispenses 3M Dirt Trap Clear Film
• Durable metal construction for use in automotive paint shops
• High-strength magnets secure unit on vertical metal surfaces
• Magnets allow moving dispenser to new locations

3M Dirt Trap Clear Film Dispenser conveniently stores and dispenses 3M Dirt Trap Clear Film. This dispenser comes with high-strength magnets that secure the unit on vertical metal surfaces while the clear film is dispensed and applied. Use this accessory with 18 inch wide rolls of clear film to protect lights and windows from overspray.

3M™ Dirt Trap Clear Film Dispenser makes it easy to unroll just the right length of 18" wide 3M™ Dirt Trap Clear Film (sold separately), which is specifically designed to protect lights and windows from overspray buildup in a paint booth or garage. The clear film will not block light from a bulb or window, but creates a protective barrier that can be peeled away once an overspray buildup develops. Our dispenser is made from metal for durability and comes with high strength magnets that secure it on vertical metal surfaces. Simply place the dispenser where desired and unroll the film. The magnets allow relocating the dispenser to another site if desired.

Unprotected lights and windows in an area where paint is being sprayed are likely to become coated with overspray, which can obscure light sources over time. Shielding lights and windows is easy with 3M™ Dirt Trap Clear Film. The film comes with an adhesive backing that clings to surfaces, eliminating the need to fasten the film with tape or other attachment methods. The adhesive is specially formulated to release when pulled by hand, allowing easy removal of film coated with paint overspray, dust or dirt. What's left behind is a clean light bulb or window that does not need time-consuming and labor intensive cleaning by scraping off a layer of paint.

Directions for installing 3M Dirt Trap Clear Film
Important – Scrape and clean glass surfaces thoroughly before installation

• Cover the edge of the installation squeegee with 3M™ Dirt Trap material to reduce the drag on the clear film
• Place dispenser (PN 36863) below the window or light
• Pull film up and over glass and use the squeegee to apply
• Start at the top near the center and work out to the edges as you smooth and remove air pockets and wrinkles
• Trim edges with a cutter
• Optional – Installation may be done using glass cleaner or water/alcohol solution to improve film handling.
• Replace film when heavily coated with overspray

3M Dirt Trap Model

The 3M Dirt Trap Clear Film Dispenser, model 36863, is designed to work seamlessly with 3M Dirt Trap Clear Film. This dispenser is an approved component of the 3M Dirt Trap Protection System, ensuring compatibility and reliable performance in paint shops and garages.

Using the exact model 36863 guarantees you get the right fit and function for your 3M Dirt Trap Clear Film rolls. It’s built to meet the standards set by 3M for protecting surfaces from overspray buildup.

Durable Metal Construction

Constructed from durable metal, this dispenser is built to withstand the demands of automotive paint shops. The sturdy metal frame ensures long-lasting use even in busy environments where protection and reliability are essential.

Its metal construction also supports the high-strength magnets that secure the dispenser firmly on vertical metal surfaces, making it easy to position and use without slipping or falling.

High-Strength Magnet Features

The dispenser includes high-strength magnets that hold it securely on vertical metal surfaces. This feature allows you to place the dispenser exactly where you need it, keeping the clear film accessible and ready for use.

Magnets also make it simple to move the dispenser to new locations as needed, providing flexibility in your workspace without the hassle of permanent mounting or extra hardware.

18 Inch Wide Format

This dispenser is designed to work with 18 inch wide rolls of 3M Dirt Trap Clear Film. The width is ideal for protecting lights and windows from overspray, covering a broad surface area efficiently.

Using the 18 inch wide format ensures you can unroll just the right length of film for your application, minimizing waste and making the installation process straightforward and quick.

Single Unit Pack Count

The product comes as 1 per case, providing a single dispenser ready for immediate use. This pack size is convenient for individual shops or projects that require one reliable dispenser without excess inventory.

Having one unit per case simplifies ordering and storage, making it easy to keep track of your supplies and replace the dispenser when needed without confusion.